[Spread-users] Configuration Matters - Network Topology

[John Lane Schultz]

David Lloyd wrote:
> 
> Let's say that I have two networks:
> 
>  192.168.0.0/24
>   10.  0.0.0/24
> 
> (and I have 1 or more machines in each network running Spread, and 
> there's at least one machine in this configuration that has two network 
> cards and consequently bridges the 192 and 10 network - let's call this 
> machine the BRIDGE).

> To put this another way, how do I setup a segment so that the Spread 
> Daemon on 192.168.1.1 *knows* about the BRIDGE and/or any of the other 
> machines it has a route to but is not part of their network?

Spread's design basically assumes that every daemon can send traffic directly to 
any of the other daemons in its configuration.  In some scenarios, people have 
gotten Spread to work when that assumption isn't fully kept.  However, the 
scenario you describe doesn't seem to fit in the universe of possible Spread 
configurations.

Cheers!

-- 
John Schultz
Spread Concepts LLC
Phn: 443 838 2200
Fax: 301 560 8875