[Spread-users] Read_form2 error
David Avraamides
David.Avraamides at SevernRiverCapital.com
Wed Oct 20 12:28:58 EDT 2004
Hi,
I just tried to add one more server (ct-srvapp-06) to our spread.conf
file and start up a daemon on there. Its working on the new machine and
two of the older machines, but one of the older machines
(ct-srvwebin-01, where it was always running fine) is failing to start.
I'm getting this "form" error when I run it interactively:
ip_init: using file: spread.access_ip
Conf_init: using file: spread.conf
Successfully configured Segment 0 [10.10.1.255:4803] with 3 procs:
ct-srvwebin-01: 10.10.1.28
ct-srvmon-01: 10.10.1.37
ct-srvapp-06: 10.10.1.117
Successfully configured Segment 1 [10.10.2.255:4803] with 1 procs:
ct-dev-01: 10.10.2.20
Read_form2: no such id 168427892
Exit caused by Alarm(EXIT)
I don't understand what this means and how adding one more machine to
the segment could cause such a problem. Here's the config file I'm
using:
Spread_Segment 10.10.1.255:4803 {
ct-srvwebin-01
ct-srvmon-01
ct-srvapp-06
}
Spread_Segment 10.10.2.255:4803 {
ct-dev-01
}
Thanks in advance,
-Dave
____________________________________
David Avraamides
Severn River Capital Management
David.Avraamides at SevernRiverCapital.com
v: 203.971.3681
f: 203.971.3615
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.spread.org/pipermail/spread-users/attachments/20041020/7e6911d4/attachment.html
More information about the Spread-users
mailing list