[Spread-users] spuser doesn't run with multiple daemons

[George Schlossnagle]

Also, probably wise to make sure that hist broadcast address really is 
138.100.12.255.

George

On Thursday, September 18, 2003, at 01:33  PM, Ryan Caudy wrote:

> What is the exact command line you use with spuser?  Also, have you 
> tried your tests with spuser connected to all three daemons, and 
> tested different combinations of daemons together (since you say it 
> works with two but not with three, I wish to distinguish between a 
> problem with one server, and a more systematic problem)?
>
> --Ryan
>
> Sergio S wrote:
>
>> Hi, i am a student that is using spread. I have a problem when I use 
>> 3 daemons in 3 different machines.
>> The machines have these addreses:
>> 138.100.12.120
>> 138.100.12.121
>> 138.100.12.122
>> Each machine runs it's own daemon. The spread.conf file has the next 
>> configuration:
>> Spread_Segment 138.100.12.255:4803{
>>                   Adapt05        138.100.12.120
>>                   Adapt06        138.100.12.121
>>                   Adapt07        138.100.12.122
>> }
>> After the daemons run i try to execute the spuser program  but it 
>> doesn't connect to the daemon and the following message is shown:
>> Spread library version is 3.17.0
>> recv_nointr_timeout: Timed out
>> SP_error: (-8) Connection closed by spread
>> Bye.
>> If all the machines are in the same sub-network. What is the problem?
>> It works correctly with 2 machines. Thanks
>> _________________________________________________________________
>> Localiza y ponte en contacto con tus antiguos compañeros de clase en 
>> MSN Compañeros.  http://mipasado.msn.es/
>> _______________________________________________
>> Spread-users mailing list
>> Spread-users at lists.spread.org
>> http://lists.spread.org/mailman/listinfo/spread-users
>
> -- 
> Ryan W. Caudy
> Center for Networking and Distributed Systems
> Department of Computer Science
> Johns Hopkins University
>
>
>
> _______________________________________________
> Spread-users mailing list
> Spread-users at lists.spread.org
> http://lists.spread.org/mailman/listinfo/spread-users
>
-- George Schlossnagle
-- Principal Consultant
-- OmniTI Computer Consulting, Inc.
-- +1.410.872.4910 x202
-- 1024D/1100A5A0 1370 F70A 9365 96C9 2F5E  56C2 B2B9 262F 1100 A5A0