[Spread-users] spuser doesn't run with multiple daemons

Yair Amir yairamir at cnds.jhu.edu
Thu Sep 18 13:45:03 EDT 2003

If it works with 2 but does not work with 3 machines, it indicates to
me that your broadcast address does not work.
You can verify this if you see lots of retransmissions using

To correct it, you could use a multicast address (e.g.
instead of the

You could also make sure your network is set up correctly on the 3
machines with respect to the broadcast address.

If you are using Spread in a course, it would be nice to know where.


       :) Yair.
On Thursday, September 18, 2003 1:03 PM
Sergio S brijuerga at hotmail.com wrote:

Sergio> Hi, i am a student that is using spread. I have a problem when I use 3 
Sergio> daemons in 3 different machines.
Sergio> The machines have these addreses:

Sergio> Each machine runs it's own daemon. The spread.conf file has the next 
Sergio> configuration:

Sergio> Spread_Segment{
Sergio>                    Adapt05
Sergio>                    Adapt06
Sergio>                    Adapt07
Sergio> }

Sergio> After the daemons run i try to execute the spuser program  but it doesn't 
Sergio> connect to the daemon and the following message is shown:

Sergio> Spread library version is 3.17.0
Sergio> recv_nointr_timeout: Timed out
Sergio> SP_error: (-8) Connection closed by spread

Sergio> Bye.

Sergio> If all the machines are in the same sub-network. What is the problem?
Sergio> It works correctly with 2 machines. Thanks

Sergio> _________________________________________________________________
Sergio> Localiza y ponte en contacto con tus antiguos compañeros de clase en MSN 
Sergio> Compañeros.  http://mipasado.msn.es/

Sergio> _______________________________________________
Sergio> Spread-users mailing list
Sergio> Spread-users at lists.spread.org
Sergio> http://lists.spread.org/mailman/listinfo/spread-users

More information about the Spread-users mailing list