[Spread-users] getting 2 daemons to talk to each other?
Rod Fleischer
rodf at sparta.com
Thu Mar 20 18:12:05 EST 2003
I have two spread daemons that I can't seem to get to talk to each
other. My segment configurations are as follows:
On one side of the router (vader, 192.168.1.10):
Spread_Segment 192.168.1.255:4803 {
vader 192.168.1.10
}
Spread_Segment 157.185.80.255:4803 {
prince 157.185.80.64
}
On the other side of the router (prince, 157.185.80.64):
Spread_Segment 157.185.80.255:4803 {
prince 157.185.80.64
}
Spread_Segment 192.168.1.255:4803 {
vader 192.168.1.10
}
Running tcpdump on both machines shows that they talk to each other
briefly in very small messages (120 bytes or so) after they've been up
for about a minute, and that's it. I then have two clients connect to
the daemons via localhost using the same group identifier string, and
then multicast a message out in fifo mode. The other side never sees
the multicast messages, nor do the daemons ever give any visible sign to
me that they've seen each other.
Can anyone give me any clues as to what I'm doing wrong? Thanks much..
-Rod
--
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Rod Fleischer SPARTA, Inc. rodf at sparta.com
Yell: 410.872.1515 x241 Fax: 410.872.8079 ICBM: 39.1739, -76.8515
More information about the Spread-users
mailing list