[Spread-users] Spread Message Configuration

[Yair Amir]

It seems to me you are not using a correct broadcast or multicast address
that works on your network. (192.168.1.253 does not seem like a correct broadcast address).

My guess is that 192.168.1.255 may work, and if not 224.1.2.3 may work if your
network supports multicast.

Otherwise, just put each daemon in its own segment, and that would surely work.

Cheers,

	:) Yair.

On 4/26/13 10:02 PM, Jesus Alberto Iribe González wrote:
> Hi, good night.
>
> Good evening, we are graduate students of Master in computational systems Institutot Tecnologico de la Laguna, studying and watching its website reading tutorials and practices wanting to have the following problems:
>
> I want to set Spread to send messages on a local network of four machines
> The configuration of my segment is
>
> Spread_Segment 192.168.1.253:4803 {
> alberto 192.168.1.77
> roger 192.168.1.78
> abel 192.168.1.79
> Pauline 192.168.1.80
> }
>
> and only we make the line like:
>
> DangerousMonitor = true
> We run to run the daemon and then run the file sptmonitor.exe, create and send a partition and set recivida by the devil.
>
> finally
> We run sptuser.exe and create a group
> which is created on each machine without relation to the other and we can not RECEIVE messages of others
>
>
> We hope your help
> Thanks a lot.
>
>
>
>
>
> Iribe González Jesús Alberto
> Ing. en Sistemas Computacionales
> Skype: jaigalbert1
> Zello: jaigalbert
> Cel: 6691597183 o 8717822253
> Casa: 6692001872
> Email:
> jaigalbert at hotmail.com
> jaigalbert at gmail.com
> jaigalbert at yahoo.com
>
>
> _______________________________________________
> Spread-users mailing list
> Spread-users at lists.spread.org
> http://lists.spread.org/mailman/listinfo/spread-users
>