[Spread-users] Spread startup
Theo Schlossnagle
jesus at omniti.com
Tue Sep 26 09:26:04 EDT 2006
On Sep 26, 2006, at 6:14 AM, Ian Eiloart wrote:
> I have spread configured with this segment only:
> Spread_Segment 139.184.15.255:4803 {
> karpinski 139.184.14.85
> chip 139.184.14.86
> lynndie 139.184.14.87
> sivits 139.184.14.88
> }
>
> I'm using wackamole, configured to share about 20 IP addresses in
> virtual interfaces ("VIFs") between those four
> machines. Sometimes, when I use wackatrl -l, I get output like this:
>
> Owner: 127.0.0.1
> * lo0:139.184.14.101/32
> -> lo0:139.184.14.70/32
>
Make sure that "ping `hostname`" on all your boxes pings the expected
publicly accessible IP address. (85-88). If not, set your hostname
and make sure you have an /etc/hosts entry that points that hostname
to the right IP. That, to me, looks like a wackamole issue more than
a Spread issue.
// Theo Schlossnagle
// CTO -- http://www.omniti.com/~jesus/
// OmniTI Computer Consulting, Inc. -- http://www.omniti.com/
More information about the Spread-users
mailing list