[Spread-users] unable to make it work !

ddelattre at forclum.eiffage.fr ddelattre at forclum.eiffage.fr
Tue Jul 25 04:23:37 EDT 2006


Hello,
We are trying to use Spread and it doesn't works. Two kinds of problems : 


With sptuser

D:\Specifique\Spread>sptuser
Spread library version is 3.17.3
recv_nointr_timeout: Timed out
SP_error: (-8) Connection closed by spread

Bye.

With spread
at the end

D:\Specifique\Spread>Spread
/===========================================================================\
| The Spread Toolkit.                                                       |
| Copyright (c) 1993-2002 Spread Concepts LLC                               |
| All rights reserved.                                                      |
|                                                                           |
| The Spread toolkit is licensed under the Spread Open-Source License.      |
| You may only use this software in compliance with the License.            |
| A copy of the license can be found at http://www.spread.org/license       |
|                                                                           |
| This product uses software developed by Spread Concepts LLC for use       |
| in the Spread toolkit. For more information about Spread,                 |
| see http://www.spread.org                                                 |
|                                                                           |
| This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF     |
| ANY KIND, either express or implied.                                      |
|                                                                           |
| Spread is developed at Spread Concepts LLC and the Center for Networking  |
| and Distributed Systems, The Johns Hopkins University.                    |
|                                                                           |
| Creators:                                                                 |
|    Yair Amir             yairamir at cs.jhu.edu                              |
|    Michal Miskin-Amir    michal at spreadconcepts.com                        |
|    Jonathan Stanton      jstanton at gwu.edu                                 |
|                                                                           |
| Major Contributors:                                                       |
|    Cristina Nita-Rotaru crisn at cs.purdue.edu - GC security.                |
|    Theo Schlossnagle    jesus at omniti.com - Perl, skiplists, autoconf.     |
|    Dan Schoenblum       dansch at cnds.jhu.edu - Java interface.             |
|    John Schultz         jschultz at d-fusion.net - contribution to process   |
|                                       group membership.                   |
|                                                                           |
| Special thanks to the following for providing ideas and/or code:          |
|    Ken Birman, Danny Dolev, Mike Goodrich, Ben Laurie,                    |
|    David Shaw, Robbert VanRenesse.                                        |
|                                                                           |
| Partial funding provided by the Defense Advanced Research Project Agency  |
| (DARPA) and the National Security Agency (NSA) since 2000. The Spread     |
| toolkit is not necessarily endorsed by DARPA or the NSA.                  |
|                                                                           |
| For a full list of contributors, see Readme.txt in the distribution.      |
|                                                                           |
| WWW:     www.spread.org     www.cnds.jhu.edu    www.spreadconcepts.com    |
| Contact: spread at spread.org                                                |
|                                                                           |
| Version 3.17.03 Built 15/October/2004                                     |
\===========================================================================/
Conf_init: using file: spread.conf
Successfully configured Segment 0 [172.21.164.255:4803] with 1 procs:
                GTC_T_ACQ_Q1: 172.21.164.10
Successfully configured Segment 1 [172.22.164.255:4803] with 8 procs:
                GTC_T_ACQ_Q2: 172.22.164.10
              GTC_T_OPE_1_Q2: 172.22.164.11
             GTC_T_OPE_1_PC3: 172.22.164.15
                   GTC_T_BDD: 172.22.164.19
                   GTC_T_ARC: 172.22.164.20
               GTC_T_ACQ_GTE: 172.22.164.22
             GTC_T_OPE_3_CLI: 172.22.164.23
                   GTC_T_INT: 172.22.164.26
Successfully configured Segment 2 [172.23.164.255:4803] with 3 procs:
                GTC_T_ACQ_Q3: 172.23.164.10
              GTC_T_OPE_1_Q3: 172.23.164.11
             GTC_T_OPE_1_MAI: 172.23.164.15
Successfully configured Segment 3 [172.24.164.255:4803] with 6 procs:
                GTC_T_ACQ_Q4: 172.24.164.10
              GTC_T_OPE_1_Q4: 172.24.164.11
             GTC_T_OPE_1_ADM: 172.24.164.15
             GTC_T_OPE_2_ADM: 172.24.164.16
             GTC_T_OPE_1_CLI: 172.24.164.18
             GTC_T_OPE_2_CLI: 172.24.164.19
disabling Dangerous Monitor Commands!
G_init:
G_handle_trans_memb:
G_handle_trans_memb in GOP
G_handle_trans_memb: Received trans memb id of: {proc_id: -1407802358  time:
1153755970}
Membership id is ( -1407867894, 1153755976)
--------------------
Configuration at GTC_T_ACQ_Q2 is:
Num Segments 4
        1       172.21.164.255    4803
                GTC_T_ACQ_Q1            172.21.164.10
        3       172.22.164.255    4803
                GTC_T_ACQ_Q2            172.22.164.10
                GTC_T_ACQ_GTE           172.22.164.22
                GTC_T_INT               172.22.164.26
        1       172.23.164.255    4803
                GTC_T_ACQ_Q3            172.23.164.10
        1       172.24.164.255    4803
                GTC_T_ACQ_Q4            172.24.164.10
====================
G_handle_reg_memb:  with (172.21.164.10, 1153755976) id
G_handle_reg_memb in GTRANS
G_handle_reg_memb: (  AGREED) GROUPS message sent in GTRANS with 8 bytes
G_handle_groups:
G_handle_groups in GGATHER
G_handle_groups: GROUPS message received from GTC_T_ACQ_Q1 - msgs 1, daemons 1
G_handle_groups:
G_handle_groups in GGATHER
G_handle_groups: GROUPS message received from GTC_T_ACQ_Q2 - msgs 2, daemons 2
G_handle_groups:
G_handle_groups in GGATHER
G_handle_groups: GROUPS message received from GTC_T_ACQ_GTE - msgs 3, daemons 3
Answer_retrans: retrans of 1 requested while Aru is 3
Exit caused by Alarm(EXIT)

MY SPREAD.CONF IS

Spread_Segment 172.21.164.255:4803 {
 GTC_T_ACQ_Q1 172.21.164.10
}

Spread_Segment 172.22.164.255:4803 {
 GTC_T_ACQ_Q2 172.22.164.10
 GTC_T_OPE_1_Q2 172.22.164.11
 GTC_T_OPE_1_PC3 172.22.164.15
 GTC_T_BDD 172.22.164.19
 GTC_T_ARC 172.22.164.20
 GTC_T_ACQ_GTE 172.22.164.22
 GTC_T_OPE_3_CLI 172.22.164.23
 GTC_T_INT 172.22.164.26
}

Spread_Segment 172.23.164.255:4803 {
 GTC_T_ACQ_Q3 172.23.164.10
 GTC_T_OPE_1_Q3 172.23.164.11
 GTC_T_OPE_1_MAI 172.23.164.15
}

Spread_Segment 172.24.164.255:4803 {
 GTC_T_ACQ_Q4 172.24.164.10
 GTC_T_OPE_1_Q4 172.24.164.11
 GTC_T_OPE_1_ADM 172.24.164.15
 GTC_T_OPE_2_ADM 172.24.164.16
 GTC_T_OPE_1_CLI 172.24.164.18
 GTC_T_OPE_2_CLI 172.24.164.19
}

#GTC_T_OPE_1_Q1 172.21.164.11
#GTC_T_OPE_2_PC3 172.22.164.16
#GTC_T_OPE_1_GTE 172.22.164.25 
#GTC_T_ACQ_BDT 172.24.164.21
#GTC_T_OPE_1_UTI 172.24.164.22


#Spread_Segment 172.27.112.255:4803 {
# GTC_B_ACQ 172.27.112.10
# GTC_B_OPE_1_PCS 172.27.112.13
# GTC_B_OPE_1_ADM 172.27.112.16
#}

DebugFlags = { PRINT EXIT GROUPS }
#EventLogFile = SpreadLog-%h.txt
#EventTimeStamp = "[%a %d %b %Y %H:%M:%S]"
DangerousMonitor = false


Can somebody help us ?


Dominique Delattre
FORCLUM Informatique & Systèmes
 T 01.45.91.53.23
 
ddelattre at forclum.eiffage.fr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.spread.org/pipermail/spread-users/attachments/20060725/356c4fd4/attachment.html 


More information about the Spread-users mailing list