[Spread-users] no daemon

[Cristina Nita-Rotaru]

Your spread servers run on port 4803 and your client
tries to connect to port 2300. Make the client to
connect to the port where the spread servers are running.

-- Cristina

On Fri, 2 Sep 2005, Milind Dumbare wrote:

> [milind at Matrix spread-src-3.17.3]$ ./spread -c spread.conf
>
> Conf_init: using file: spread.conf
> Successfully configured Segment 0 [192.168.1.255:4803] with 2 procs:
>                       matrix: 192.168.1.21
>                     chanakya: 192.168.1.24
>
> [milind at Matrix spread-src-3.17.3]$ ./spuser -s 2300
> Spread library version is 3.17.3
> SP_error: (-2) Could not connect. Is Spread running?
>
> Bye.
> [milind at Matrix spread-src-3.17.3]$
>
> my spread.conf is as follows
>
> 	Spread_Segment  192.168.1.255{
>         	matrix 192.168.1.21
> 	        chanakya 192.168.1.24
> 	}
> 	DebugFlags = { PRINT EXIT }
> 	EventLogFile = testlog.out
> 	EventTimeStamp
> 	or
> 	EventTimeStamp = "[%a %d %b %Y %H:%M:%S]"
> 	DangerousMonitor = false
> 	SocketPortReuse = AUTO
> 	RuntimeDir = /var/run/spread
> 	DaemonUser = spread
> 	DaemonGroup = spread
>
>
>
> _______________________________________________
> Spread-users mailing list
> Spread-users at lists.spread.org
> http://lists.spread.org/mailman/listinfo/spread-users
>