[Spread-users] spread-src-3.17.3: "Conf_init: My proc id (10.10.10.46) is not in configuration"
Li, Grant
Grant_Li at csgsystems.com
Fri May 6 11:44:04 EDT 2005
Hi,
I have difficulty to start Spread daemon on a Solaris 2.7 box. The error
message is shown above.
The entries in the spread.conf are:
<config start>
Spread_Segment 10.10.10.46:2211 {
localhost 127.0.0.1
}
DebugFlags = { ALL PRINT EXIT }
EventLogFile = testlog.out
EventTimeStamp = "[%a %d %b %Y %H:%M:%S]"
DangerousMonitor = false
#SocketPortReuse = AUTO
#RuntimeDir = /var/run/spread
#DaemonUser = spread
#DaemonGroup = spread
<config end>
Spread daemon was started by the following command:
$ Spread -c spread.conf
The error messages are:
[Fri 06 May 2005 10:05:58] disabling Dangerous Monitor Commands!
[Fri 06 May 2005 10:05:58] Finished configuration file.
[Fri 06 May 2005 10:05:58] Conf_init: My proc id (10.10.10.46) is not in
configuration
Exit caused by Alarm(EXIT)
Any help would be greatly appreciated.
Thanks
Grant Li
CSG Systems, Inc.
(402)431-7515
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.spread.org/pipermail/spread-users/attachments/20050506/5e4f758c/attachment.html
More information about the Spread-users
mailing list