[Spread-users] Please help me understand

Mike Perik mikep at foxriver.com
Wed Feb 9 15:27:14 EST 2005

I think what apocalypznow is saying is that and are the public ip addresses that two routes have and behind one router are two machines and and behind another router are two machines and

        ____________                                    ____________
       |   |--------------------------| |
       |____________|                                  |____________|
          /                     \                                           /                      \

I'm not sure what the spread.conf would look like in this situation.
I think the answer that John gave to question # 2 implies that no you can't do this.



On Wednesday 09 February 2005 01:56 pm, John Schultz wrote:
> apocalypznow wrote:
> > Hi I'm a noob... so please bear with me.
> >
> > I am trying to set up 4 machines on 2 networks, which would all join the
> > same group "chat01" and hopefully be able to message each other using
> > multicast() with either RELIABLE_MESS or FIFO_MESS.
> > Two machines are at, and their ips are and
> >  Two other machines are at and their ips are
> > at and  Port 4803 is open on each of the
> > two routers.  Networks and are only connected
> > on the internet.
> >
> > I've tried various configurations in my spread.conf file and I can't get
> > all 4 machines to see any messages sent to the same group "chat01".
> >
> > Questions:
> > 1) How should my spread.conf be set up - specifically the segments and
> > anything else?
> You should probably have two segments corresponding to the two separate
> networks -- assuming that by "networks" you mean that machines within
> these "networks" can 1 hop broadcast or multicast to each another.
> > 2) Where do I run the daemons?
> You should run the daemons on machines whose IP addresses are accessible
>   (i.e. - routable) by all other daemons in the config file.  So the
> daemons should be run on machines in those networks that can reach the
> daemons on the other network.
> > 3) How many daemons should I run?
> This is up to you.  But generally you should run at least one daemon per
> network that will have clients and usually even run 1 daemon on each
> machine that will have clients.  You run more daemons both for network
> efficiency and for fault tolerance.
> > 4) To which daemon should each machine connect to?
> Each machine should connect to the closest daemon that it can.  Usually,
>    this is often a connection to a daemon on the same local machine.
> However, since it seems your client machines will be on private networks
> that would not be routable by all daemons, you will probably need to
> remotely connect to the closest daemon with a public IP.

More information about the Spread-users mailing list