[Spread-users] Multiple private networks

[Yair Amir]

It is doable in several ways.

If you have only one machine doing the logging (no fault tolerance)
then you can run the daemon only on this machine and have all the
other machines just connect remotely to this daemon. Because anyway
if the 1.2.3.200 is not there you have no logging.

Cheers,

       :) Yair.
       

On Monday, November 24, 2003 5:04 PM
Matt Sergeant matt at sergeant.org wrote:

Matt> I want to do spread logging for multiple private networks (NATed), with 
Matt> a central log accumulator. Here's what the network looks like:


Matt> 1.2.3.1        1.2.3.2         1.2.3.3
Matt> -------        -------         -------
Matt> Contains       Contains        Contains
Matt> 25 lots        25 lots         25 lots
Matt> of IPs in      of IPs in       of IPs in
Matt> 10.0.0/24      10.0.0/24       10.0.0/24

Matt>            1.2.3.200 - external monitoring machine

Matt> Basically I want what looks like a single spread group between these, 
Matt> but the separate 10.0.0/24's don't need to know about each other. The 
Matt> 10.0.0/24 machines will be doing the logging, and the 1.2.3.200 machine 
Matt> will be doing the picking up. The individual units only have one 
Matt> externally exposed IP (i.e. 1.2.3.x).

Matt> Is this doable, and what should the config look like?


Matt> _______________________________________________
Matt> Spread-users mailing list
Matt> Spread-users at lists.spread.org
Matt> http://lists.spread.org/mailman/listinfo/spread-users