[Spread-users] Windows & LINUX on one segment

Ryan Caudy caudy at jhu.edu
Wed Jul 9 09:26:46 EDT 2003


Can we see your spread.conf? (or at least the segment description line)

--Ryan

John Longland wrote:
> Hi all
> 
> I can run spread on a segment with :
> 1.	Only Windows machines  ( Win NT)
> 2.	Only Linux machines ( LINUX RH7.3)
> 
> but if I mix these two up, things doesn't work anymore.
> 
> Commands that I use to envoke apps:
> servers:		./spread -n MACHINENAME -c spread.conf
> client		./spuser -s 4803@<IP-OF-LOCAL-MACHINE> -u john
> 
> Config: 		Al machines are defined in one segment in "spread.conf"
> 
> I have found a work-around to the problem i.e. run only one daemon on
> one machine and have all the clients connect to this one client. This works,
> but I would also like to solve the problem : not work around it !!!
> 
> Thanks
> 
> John Longland
> work :  johnl at im-systems.com
> personal : kontak at johnlongland.co.za
> website :   www.johnlongland.co.za
> 
> 
> _______________________________________________
> Spread-users mailing list
> Spread-users at lists.spread.org
> http://lists.spread.org/mailman/listinfo/spread-users
> 

-- 
Ryan W. Caudy
Center for Networking and Distributed Systems
Department of Computer Science
Johns Hopkins University





More information about the Spread-users mailing list