<div>Hi,</div>
<div>here is the config file,same for both servers: </div>
<div> </div>
<div>Spread_Segment xxx.93.145.255:3333 {<br>machine1 xxx.93.145.124<br>}<br>Spread_Segment yyy.154.219.255:3333 {<br>machineB1 yyy.154.219.120<br>}</div>
<div> </div>
<div>On each server the deamon works fine, and client sessions can communicate, but there is no way to make both server deamona see each other and have the messages cross over the internet and reach the other deamon.</div>
<div> </div>
<div>After starting up the deamons on each server, this is what I get: </div>
<div> </div>
<div>on server at yyy.154.219.120 (linux)</div>
<div>>>>>>>>>>>>>>>></div>
<div>....</div>
<div>Conf_load_conf_file: using file: spread.conf<br>Successfully configured Segment 0 [xxx.93.145.255:3333] with 1 procs:<br> machine1: xxx.93.145.124<br>Successfully configured Segment 1 [yyy.154.219.255:3333] with 1 procs:<br>
machineB1: yyy.154.219.120<br>Finished configuration file.<br>Hash value for this configuration is: 1744128833<br>Conf_load_conf_file: My name: machineB1, id: xyyy.154.219.120, port: 3333<br>Membership id is ( -660939912, 1232603174)<br>
--------------------<br>Configuration at machineB1 is:<br>Num Segments 2<br> 0 xxx.93.145.255 3333<br> 1 xxyyy.154.219.255 3333<br> machineB1 yyy.154.219.120<br>
====================</div>
<div> </div>
<div><<<<<<<<<<<<<<<<</div>
<div> </div>
<div>On server xxx.93.145.255 (NT)</div>
<div> </div>
<div>>>>>>>>>>>>>>>>>>>></div>
<div>Conf_load_conf_file: using file: spread.conf<br>Successfully configured Segment 0 [xxx.93.145.124:3333] with 1 procs:<br> machine1: xxx.93.145.124<br>Successfully configured Segment 1 [yyy.154.219.120:3333] with 1 procs:<br>
machineB1: yyy.154.219.120<br>Finished configuration file.<br>Hash value for this configuration is: 2008767669<br>Conf_load_conf_file: My name: machine1, id: xxx.93.145.124, port: 3333<br>Membership id is ( -799174276, 1232608861)<br>
--------------------<br>Configuration at machine1 is:<br>Num Segments 2<br> 1 xxx.93.145.124 3333<br> machine1 xxx.93.145.124<br> 0 yyy.154.219.120 3333<br>====================</div>
<div> </div>
<div><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<</div>
<div> </div>
<div>I can connect locally on each server using spuser, join a group and send messages. If I use several clients joining the same group, they all see each other. </div>
<div>However. joining the same group on both severs across the internet will not get me anywhere. No client session from one server gets to the other server</div>
<div>Now, both server have no firewall, I have disabled it on the NT and opened everything on the linux. </div>
<div>Shoulnd't this work or am I missing something?</div>
<div> </div>
<div>Hope someone can help, I haven't been able to figure it out.</div>
<div> </div>
<div>Thanks in advance</div>
<div>Paolo</div>