Hello, <br><br>One of my servers has multiple interfaces that are being used for the same application. <br><br>External users connect over interface eth2 and my spread network is running on eth1. Spread is configured on my system to use the Multi cast address <a href="http://244.0.0.31">244.0.0.31</a> which seems to be using device eth1 instead of eth2 . <br>
<br>eth1 is the default route for this server. <br><br>Other servers on my network is listening to multicast requests on eth2 - eth2 is their default route is there anyway to specify which interface to use for spread multicast traffic? In spread configuration? <br>
<br>Thanks. <br clear="all"><br>My spread config looks like the following: <br><br>Spread_Segment <a href="http://224.0.0.31:4803">224.0.0.31:4803</a> {<br> host1 <a href="http://10.187.31.101">10.187.31.101</a> { D <a href="http://10.187.31.101">10.187.31.101</a> C <a href="http://127.0.0.1">127.0.0.1</a> }<br>
host2 <a href="http://10.187.31.201">10.187.31.201</a> { D <a href="http://10.187.31.201">10.187.31.201</a> C <a href="http://127.0.0.1">127.0.0.1</a> }<br> host3 <a href="http://10.187.31.102">10.187.31.102</a> { D <a href="http://10.187.31.102">10.187.31.102</a> C <a href="http://127.0.0.1">127.0.0.1</a> }<br>
etc.... <br>}<br><br>All the .31 addresses are defined on the dedicated address being used for spread eth2 <br><br>Please advise thanks. <br><br>-- <br>[ Rodrick R. Brown ] <br>