<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7638.1">
<TITLE>trouble setting up my first spread network</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<P><FONT SIZE=2>hello folks,<BR>
<BR>
i've got my spread-using programs built on linux, but now i can't get my first spread network set up.<BR>
<BR>
i've got 19 computers that will have spread-using programs on them. there's one master program that runs on the first computer, and around a hundred client programs that run on all 19 of the computers. i set up a config file that i hoped would include all computers into a single spread network, like this:<BR>
<BR>
Spread_Segment 172.20.43.255:4803 {<BR>
<BR>
c3serv03 172.20.43.3<BR>
c3serv04 172.20.43.4<BR>
c3serv05 172.20.43.5<BR>
[... and so on, for 19 separate entries]<BR>
<BR>
}<BR>
<BR>
the spread daemons on all 19 computers launch okay. the code in all my programs joins a group that has the same name as the dns name of the first computer. all my programs connect to the daemon running on their respective local computers. alas, the master program can successfully communicate with client programs that are running on the same computer where it is running, but it does NOT get member-join messages for any of the programs running on the other 18 computers.<BR>
<BR>
turning to the spread user guide, i read about spmonitor, on pages 16-17. it shows the monitor menu that the program displays, and i can get that far. then it says this: "The most common command will be to send a daemon a status query. The results of that query will look something like figure 2.9" but it does not say what you're supposed to type to get to that status query. i tried almost every item in the spmonitor menu, and none of them did anything very useful. item 3, "review partition," shows all 19 of my linux computers, but that's about it.<BR>
<BR>
i'm sorry guys, but your documentation is awfully poor.<BR>
<BR>
how can i tell why the programs on the other 18 boxes can't communicate with the master on the first box? as a side question, do the daemons ever try to talk to each other using anything other than udp packets sent through port 4803? if so, that's the problem, right there. the admins at my site are super-paranoid, they've got everything locked down tight. i had to go through unpleasant gyrations just to get them to open up this one port for me.<BR>
<BR>
thanks,<BR>
allen</FONT>
</P>
<DIV><P><HR>
********************************************<BR>
This message is intended only for the use of the Addressee and<BR>
may contain information that is PRIVILEGED and CONFIDENTIAL.<BR>
<BR>
If you are not the intended recipient, you are hereby notified<BR>
that any dissemination of this communication is strictly prohibited.<BR>
<BR>
If you have received this communication in error, please erase<BR>
all copies of the message and its attachments and notify us<BR>
immediately.<BR>
<BR>
Thank you.<BR>
********************************************
</P></DIV>
</BODY>
</HTML>