[Spread-users] Group communication on Spread
Joseph VanAndel
vanandel at ucar.edu
Thu May 14 10:12:15 EDT 2009
If the two systems are on different subnets, you need a spread.conf
file that resembles:
Spread_Segment XX.117.85.255:4803 {
merlot XX.117.85.3
}
Spread_Segment XX.117.78.255:4803 {
nyquist XX.117.78.52
tiger-mac XX.117.78.182
}
On May 12, 2009, at 11:32 PM, ARVIND SHEKHAR wrote:
> Hi,
>
> Im new to Spread and would be thankful if someone directs me on how
> to establish communication between group on two different system.
>
> I aws able to do the following,
> 1. I configured the Spread daemon with the IP addresses of two
> systems(System 1 and System 2) .
> 2. I ran Spread daemon with same configurations on both the systems
> 3. I created a group on System 1 with a group name Test.
> 4. I created a group on System 2 with a group name Test
> 5. I sent a message to group Test from System 1. The message is
> received only on group Test of system 1.
>
> How do i get the message to be received on group Test on System 2.
> Are there any configuration changes i need to make.
>
> Thanks
> Arvind
>
> _______________________________________________
> Spread-users mailing list
> Spread-users at lists.spread.org
> http://lists.spread.org/mailman/listinfo/spread-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.spread.org/pipermail/spread-users/attachments/20090514/df9296a5/attachment.html
More information about the Spread-users
mailing list