[Spread-users] 32 bit boundary of sequence numbers
Alec H. Peterson
alec.peterson at messagesystems.com
Mon Feb 2 12:34:24 EST 2009
Hi there,
We use spread on a variety of LAN rings with good results, however we
have a customer who is experiencing ring lockups. I've attached the
spmonitor output from while this issue is happening, but basically it
seems like the sequence numbers are right around the 32 bit boundary.
We don't have much more information to go on at this point, but a
cursory look through the spread code seems to indicate that it does
have a problem when it reaches the 32 bit boundary.
I've attached the spread config file and the spmonitor output while
the problem was happening.
Thanks in advance for any help!
Alec
--
Alec H. Peterson - alec.peterson at messagesystems.com
+1 443 656 3322
Director of Technical Services
Message Systems, Inc.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: spmonitor.log
Type: application/octet-stream
Size: 147845 bytes
Desc: not available
Url : http://lists.spread.org/pipermail/spread-users/attachments/20090202/6482bba0/attachment.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: mbus.conf
Type: application/octet-stream
Size: 787 bytes
Desc: not available
Url : http://lists.spread.org/pipermail/spread-users/attachments/20090202/6482bba0/attachment-0001.obj
More information about the Spread-users
mailing list