[Spread-users] Memb_token_loss: bug !!! state is 2
John Robinson
jr at vertica.com
Fri Apr 25 07:51:07 EDT 2008
I've noticed that you have to wait a few seconds between reloads.
I assume spmonitor is enough rope to hang yourself if not used sparingly.
/jr
---
Adrian Revill wrote:
> Hi im using 4.0 and when ever i issue a reload from spmonitor the spread
> daemon crashes and gives the error
>
> Net_recv: Received Packet - packet length(36), packed message length(36)
> Conf_load_conf_file: using file: ../spread.conf
> Successfully configured Segment 0 [172.1.255.255:4800] with 16 procs:
> master1: 172.1.0.10
> master2: 172.1.0.11
> boot: 172.1.0.5
> boot1: 172.1.0.6
> boot2: 172.1.0.7
> athlon-1: 172.1.1.1
> opto-1: 172.1.2.1
> opto-2: 172.1.2.2
> opto-3: 172.1.2.3
> opto-4: 172.1.2.4
> opto-5: 172.1.2.5
> opto-6: 172.1.2.6
> opto-7: 172.1.2.7
> opto-8: 172.1.2.8
> opto-201: 172.1.2.201
> quad-1: 172.1.3.1
> Set Alarm mask to: fffeefee
> Finished configuration file.
> Hash value for this configuration is: 2149500836
> Conf_load_conf_file: My name: boot2, id: 172.1.0.7, port: 4800
> Memb_token_loss: I lost my token, state is 1
> Scast_alive: State is 2
> Net_recv: Received Packet - packet length(36), packed message length(36)
> Conf_load_conf_file: using file: ../spread.conf
> Successfully configured Segment 0 [172.1.255.255:4800] with 16 procs:
> master1: 172.1.0.10
> master2: 172.1.0.11
> boot: 172.1.0.5
> boot1: 172.1.0.6
> boot2: 172.1.0.7
> athlon-1: 172.1.1.1
> opto-1: 172.1.2.1
> opto-2: 172.1.2.2
> opto-3: 172.1.2.3
> opto-4: 172.1.2.4
> opto-5: 172.1.2.5
> opto-6: 172.1.2.6
> opto-7: 172.1.2.7
> opto-8: 172.1.2.8
> opto-201: 172.1.2.201
> quad-1: 172.1.3.1
> Set Alarm mask to: fffeefee
> Finished configuration file.
> Hash value for this configuration is: 2149500836
> Conf_load_conf_file: My name: boot2, id: 172.1.0.7, port: 4800
> Memb_token_loss: bug !!! state is 2
> Exit caused by Alarm(EXIT)
>
>
> Looking in this forum a similar problem was reported last march but
> never replied to, did anyone get an answer?
>
> regards
> Adrian
>
>
> _______________________________________________
> Spread-users mailing list
> Spread-users at lists.spread.org
> http://lists.spread.org/mailman/listinfo/spread-users
More information about the Spread-users
mailing list