[Spread-users] Problem with multiple network interfaces

[Vivien Quema]

Hello,

I am using Spread with computers that have two network interfaces  
(fast and giga). I would like to be able to chose the network to be  
used by Spread.

When I put the giga address (129.88.98.27) in the spread.conf file,  
it works fine.

When I put the fast address (129.88.97.27) in the spread.conf file,  
it does not work...  I got the following error :


Successfully configured Segment 0 [129.88.97.255:4804] with 3 procs:
                       itaf27: 129.88.97.27
                       itaf37: 129.88.97.37
                      itaf104: 129.88.97.104
Finished configuration file.
Hash value for this configuration is: 333516047
Conf_load_conf_file: My proc id (129.88.98.27) is not in configuration


Any idea?

Thanks for your help,
Vivien


---------------------------------------------------

Result of ifconfig on my computer:


eth0      Link encap:Ethernet  HWaddr 00:30:6E:39:C6:07
           inet addr:129.88.97.27  Bcast:129.88.97.255  Mask: 
255.255.255.0
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:681574 errors:0 dropped:0 overruns:0 frame:0
           TX packets:328639 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:353837530 (337.4 Mb)  TX bytes:331290418 (315.9 Mb)

eth1      Link encap:Ethernet  HWaddr 00:30:6E:39:46:00
           inet addr:129.88.98.27  Bcast:129.88.98.255  Mask: 
255.255.255.0
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:1327444 errors:0 dropped:0 overruns:0 frame:0
           TX packets:620336 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:970512035 (925.5 Mb)  TX bytes:490441155 (467.7 Mb)
           Interrupt:56