[Spread-users] Re: Multicast help

[Ryan Caudy]

To the best of my knowledge, this problems is a new one.

It sounds to me like there may be a windows-specific bug or
incompatibility.  Can you fill in a bit more information about which
versions of Windows you're using?

The multicast address you're using appears valid, but can you try with
a different multicast address or with the correct broadcast address
for your network, to see if it's still a problem?

Cheers,
Ryan

On 4/13/06, Mark Snelling <mark at bakedbeans.com> wrote:
> Is anybody able to help me with this?
>
> "Mark Snelling" <mark at bakedbeans.com> wrote in message
> news:e15v06$ar4$1 at sea.gmane.org...
> > Hi
> >
> > I'm trying to set up a simple multicast segment with three Windows
> > machines. My spread.conf simply has the lines below:
> >
> > Spread_Segment 239.0.1.3 {
> > wcc013 192.168.147.187
> > wcc014 192.168.147.54
> > wcc035 192.168.147.43
> > }
> >
> > However when I try and run spread, I get the following messages and the
> > daemon terminates:
> >
> > Successfully configured Segment 0 [239.0.1.3:4803] with 3 procs:
> >                      wcc013: 192.168.147.187
> >                      wcc014: 192.168.147.54
> >                      wcc035: 192.168.147.43
> > Finished configuration file.
> > Hash value for this configuration is: 432108239
> > Conf_load_conf_file: My name: wcc014, id: 192.168.147.54, port: 4803
> > DL_init_channel: problem in setsockopt to multicast address -285212413
> > Exit caused by Alarm(EXIT)
> >
> > I've read the user guide but it sheds no light on this.
> >
> > Any help appreciated.
> >
> > Mark.
>
>
>
>
> _______________________________________________
> Spread-users mailing list
> Spread-users at lists.spread.org
> http://lists.spread.org/mailman/listinfo/spread-users
>