[Spread-users] spread over 2 networks

[John Schultz]

More than likely these daemons can't talk to one another because they 
are on different private ip subnets.  gord, ernie and mt1 all need to be 
able to route (e.g. - ping) to each other and any firewalls need to be 
open to allow UDP traffic on ports 4803, 4804 and 4805 betwixt them.

Gord Shier wrote:
> Hi, all.
> 
> I have 3 hosts in 2 networks, and I can't figure out how to get them 
> talking.
> 
> Here is the conf for all hosts:
> 
> Spread_Segment 225.0.1.1 {
>   gord 192.168.3.50
>   ernie  192.168.3.116
> }
> 
> Spread_Segment 225.0.2.1 {
>   mtl 10.12.30.2
> }
> 
> 
> I have also tried:
> Spread_Segment 192.168.3.255 {
>   gord 192.168.3.50
>   ernie  192.168.3.116
> }
> 
> Spread_Segment 10.12.30.255 {
>   mtl 10.12.30.2
> }
> 
> 
> I can get gord and ernie to talk to each other, but when I connect to 
> the daemon on mtl, I never receive messages.  I can use spuser on mtl to 
> connect to the ernie daemon, and I receive messages, but I want a number 
> of clients to connect to mtl instead of all connecting to ernie over a 
> slow link.
> 
> Regards to all,
> Gord.
> 
> _______________________________________________
> Spread-users mailing list
> Spread-users at lists.spread.org
> http://lists.spread.org/mailman/listinfo/spread-users
> 
> 


-- 
John Lane Schultz
Spread Concepts LLC
Phn: 443 838 2200