[Spread-users] premature death

[Tyler Hammond]

As it turns out, my issues on Mac OS X were related to install  
configuration.
All were straightforward, the last of which -- Spread: FAILED chroot to  
'/var/run/spread'  -- is fixed and spread seems to be running fine.
An improved install script for Mac OS X would be nice.  The Debian  
package works.

I have returned the DebugFlags to { PRINT EXIT }.

Thanks,

Tyler

On 2005 Apr 01, at 9:43 AM, Jonathan Stanton wrote:

> Hi,
>
> If you are printing ALL debug flags you will get a LOT of prints --
> almost all of which are normal and don't indicate a problem. The IP
> access control one you list is actually always printed when you have  
> ALL
> prints enabled and does not indicate a problem (if it can't find the
> config file it just ignores it and does not use IP access controls) The
> print is there to warn you that it didn't find the file if you are
> trying to use them.
>
> The more important problem is why it is crashing on you. Can you send
> the last 50 lines or so of the output to the log file after it crashes?
> I don't see how the IP message is the reason it crashed so there should
> be something else in the log. It might also be helpful to see the end  
> of
> the log file when you comment out the "DebugFlags" line in the config
> file so it only prints the usual output (because even then any fatal
> crash should cause a print of why it crashed).
>
> Your config file looks fine otherwise.
>
> Cheers
>
> Jonathan
>
>
> On Mon, Mar 21, 2005 at 09:59:55AM -0500, Tyler Hammond wrote:
>> These are the only lines in the spread.conf file which are not  
>> comments
>> (I've excluded the actual IP's, but they are all valid, on the same
>> subnet and running spread daemons)
>>
>>
>> Spread_Segment 239.0.0.1:4803 {
>>         mach1                   xxx.xxx.xxx.xxx
>>         mach2                   xxx.xxx.xxx.xxx
>>         mach3                   xxx.xxx.xxx.xxx
>> }
>> DebugFlags = {ALL}
>> EventLogFile = /var/log/spread.log
>> EventTimeStamp
>>
>>
>>
>> On 2005 Mar 19, at 7:42 AM, Ryan Caudy wrote:
>>
>>> I think that this message tells you it was configured to use IP  
>>> access
>>> controls, but you don't have the appropriate configuration file.
>>> Please check your spread.conf, or send the list a copy of it.
>>>
>>> Cheers,
>>> Ryan
>>>
>>>
>>> On Fri, 18 Mar 2005 15:56:09 -0500, Tyler Hammond
>>> <thammond at millburncorp.com> wrote:
>>>> When I run the spread daemon on Mac OSX I get the following message
>>>> before it dies:
>>>>
>>>>        ip_init: IP access control file not found.
>>>>        If you are using IP based access controls, please make sure
>>>> the file
>>>> exists.
>>>>
>>>> Followed by the configuration info.
>>>>
>>>> What does this message tell me, why does it die?
>>>>
>>>> #################################################################### 
>>>> ##
>>>> This e-mail is confidential and should not be redistributed or
>>>> forwarded by the recipient.  The information contained in this  
>>>> e-mail
>>>> message is intended only for the use of the individual or entity  
>>>> named
>>>> above.  If the reader of this message is not the intended recipient  
>>>> or
>>>> you have received this communication in error, please immediately
>>>> notify us by telephone.  Receipt by anyone other than the intended
>>>> recipient is not a waiver of any work-product or, if applicable,
>>>> attorney-client privilege.
>>>>
>>>> This e-mail does not constitute an offering of any security.  Such  
>>>> an
>>>> offering may only be made by means of a private placement memorandum
>>>> or other disclosure document.  Nothing in this e-mail constitutes
>>>> investment advice.  Past performance is not indicative of future
>>>> results.  All e-mail to and from Millburn Ridgefield Corporation and
>>>> its affiliates is monitored, stored and made available to regulators
>>>> if requested.
>>>> #################################################################### 
>>>> ##
>>>>
>>>> _______________________________________________
>>>> Spread-users mailing list
>>>> Spread-users at lists.spread.org
>>>> http://lists.spread.org/mailman/listinfo/spread-users
>>>>
>>>
>>>
>>
>>
>> ######################################################################
>> This e-mail is confidential and should not be redistributed or
>> forwarded by the recipient.  The information contained in this e-mail
>> message is intended only for the use of the individual or entity named
>> above.  If the reader of this message is not the intended recipient or
>> you have received this communication in error, please immediately
>> notify us by telephone.  Receipt by anyone other than the intended
>> recipient is not a waiver of any work-product or, if applicable,
>> attorney-client privilege.
>>
>> This e-mail does not constitute an offering of any security.  Such an
>> offering may only be made by means of a private placement memorandum
>> or other disclosure document.  Nothing in this e-mail constitutes
>> investment advice.  Past performance is not indicative of future
>> results.  All e-mail to and from Millburn Ridgefield Corporation and
>> its affiliates is monitored, stored and made available to regulators
>> if requested.
>> ######################################################################
>>
>> _______________________________________________
>> Spread-users mailing list
>> Spread-users at lists.spread.org
>> http://lists.spread.org/mailman/listinfo/spread-users
>
> -- 
> -------------------------------------------------------
> Jonathan R. Stanton         jonathan at cs.jhu.edu
> Dept. of Computer Science
> Johns Hopkins University
> -------------------------------------------------------
>
>


######################################################################
This e-mail is confidential and should not be redistributed or
forwarded by the recipient.  The information contained in this e-mail
message is intended only for the use of the individual or entity named
above.  If the reader of this message is not the intended recipient or
you have received this communication in error, please immediately
notify us by telephone.  Receipt by anyone other than the intended
recipient is not a waiver of any work-product or, if applicable,
attorney-client privilege.

This e-mail does not constitute an offering of any security.  Such an
offering may only be made by means of a private placement memorandum
or other disclosure document.  Nothing in this e-mail constitutes
investment advice.  Past performance is not indicative of future
results.  All e-mail to and from Millburn Ridgefield Corporation and
its affiliates is monitored, stored and made available to regulators
if requested.
######################################################################