[Spread-users] Re: TimeLag in Recognising Groups
Ryan Caudy
rcaudy at gmail.com
Thu Nov 25 22:40:59 EST 2004
This certainly doesn't sound usual... a Spread group is "recognized"
when it is created, by a join when the group doesn't exist. This
simply requires delivery of one AGREED message.
What exactly are you doing to start up your Spread daemons and start
the clients? What's the time between when you call SP_join, and when
you receive the CAUSED_BY_JOIN regular membership message? What I
mean is something like:
struct timeval t1, t2;
gettimeofday(&t1, NULL);
SP_join(mbox, group_name);
SP_receive(/*ARGS*/);
/* Make sure it's the right CAUSED_BY_JOIN message. */
gettimeofday(&t2, NULL);
printf("Time to join: %f\n", t2.tv_sec - t1.tv_sec + (t2.tv_usec -
t1.tv_usec)/1000000);
If you have your Spread network up and running (i.e. with a regular
membership configuration installed) before you start the clients, the
time should be *very* short.
Cheers,
Ryan
On Thu, 25 Nov 2004 20:34:08 +0530, Abhishek Sipani <abhisheks at bsil.com> wrote:
> Hi all,
> It seems am just running into problems daily with spread.As soon as i almost
> finish fixing one a new one springs up.
> Here is the new problem :
> I have a config file which reads like
> Spread_Segment 233.1.1.1:4803 {
>
> Ravikiran 192.168.11.97
> HP187 192.168.11.77
> Shabu 192.168.11.40
> Sham 192.168.11.134
> Abhishek 192.168.11.53
> }
> i also have an mfc client for communication . Now am trying to run one
> client on Shabu(192.168.11.40) and the same on another machine
> Abhishek(192.168.11.53). Both have private_group names similar to the
> machine names
> i.e. #Shabu#Shabu and #Abhishek#Abhishek..Now my problem is it takes an
> enormously long time for the spread daemon to recognise these groups and no
> communication happens between these clients until it does that. Once done,
> there are no issues with commuincation.
> After this there are no apparent problems:
> ************************************
> Membership id is ( -1062728907, 1101394405)
> --------------------
> Configuration at Abhishek is:
> Num Segments 1
> 1 233.1.1.1 4803
> Abhishek 192.168.11.53
> ====================
> Membership id is ( -1062728920, 1101394677)
> --------------------
> Configuration at Abhishek is:
> Num Segments 1
> 2 233.1.1.1 4803
> Shabu 192.168.11.40
> Abhishek 192.168.11.53
> ====================
> ++++++++++++++++++++++
> Num of groups: 1
> [1] group FirstGroupName with 2 members:
> [1] #Abhishek#Abhishek
> [2] #Shabu#Shabu
> ----------------------
> ****************************************************************
> Moreover if some other client joins in the process,it is joined in quickly
> and the communication happens smoothly again.Am using SAFE_MESS.Would like
> to add also here that if there are clients being added to the group(which is
> same in all cases)and trying to connect to the spread daemon on the same
> machine, there are no time lags.Please advise.
> Abhishek Sipani,
> Blue Star Infotech.
> Phone:(o)-91-22-569 56969
> (direct)-91-22-569 56966
> (m) 98204 51504
> --------------------------------------------
> "When Life offers you Lemons, Learn to make Lemonade"
>
> -----Original Message-----
> From: Ryan Caudy [mailto:rcaudy at gmail.com]
> Sent: Thursday, November 25, 2004 9:54 AM
> To: abhisheks at bsil.com
> Cc: spread-users at lists.spread.org
> Subject: Re: [Spread-users] Small Help Needed
>
> I don't know the specific Spread library that your using... is it a
> wrapper around the C version, or a port? Regardless, the maximum
> length of the private name associated with a Spread connection/mailbox
> is 10, without changing definitions in the daemon source code.
>
> Cheers,
> Ryan
>
> On Wed, 24 Nov 2004 19:23:23 +0530, Abhishek Sipani <abhisheks at bsil.com>
> wrote:
> > Hi,
> > I have been using spread for some research purpose. Would like to know if
> > there is an upper limit on the UserName character length i provide..
> > i.e.
> > I do
> > sprintf(Spread_name,"4803 at 192.168.11.40");
> > int ret_val_connect;
> > m_User.GetWindowText(User,80);
> > ret_val_connect=sp.Connect(Spread_name,User);
> > if(ret_val_connect<0)
> > AfxMessageBox("Unable to Connect");
> > else
> > AfxMessageBox("Connected");
> >
> > this works fine..but if i provide a length more than 10 characters say
> > "ABCDEFGHIJKLM" as user name the call
> > ret_val_connect= SP_connect(in_SpreadName, in_ConnectionName, 0,
> 1,
> > &m_Mbox, m_PrivateGroup );
> > returns m_PrivateGroup as "#ABCDEFGHIJ#SpreadMachineName"
> >
> > How do i prevent this from getting truncated?Have tried going through the
> > enormous archives of discussions but of no avail. Please advice as i am
> > dealing with data that have names far greater than 10 characters. Am
> > relatively new to spread so some help here will be of immense help.
> >
> > Abhishek Sipani,
> > Blue Star Infotech.
> > Phone:(o)-91-22-569 56969
> > (direct)-91-22-569 56966
> > (m) 98204 51504
> > --------------------------------------------
> > "When Life offers you Lemons, Learn to make Lemonade"
> >
> > _______________________________________________
> > Spread-users mailing list
> > Spread-users at lists.spread.org
> > http://lists.spread.org/mailman/listinfo/spread-users
> >
>
> --
> ---------------------------------------------------------------------
> Ryan W. Caudy
> <rcaudy at gmail.com>
> ---------------------------------------------------------------------
> Bloomberg L.P.
> <rcaudy1 at bloomberg.net>
> ---------------------------------------------------------------------
> [Alumnus]
> <caudy at cnds.jhu.edu>
> Center for Networking and Distributed Systems
> Department of Computer Science
> Johns Hopkins University
> ---------------------------------------------------------------------
>
>
--
---------------------------------------------------------------------
Ryan W. Caudy
<rcaudy at gmail.com>
---------------------------------------------------------------------
Bloomberg L.P.
<rcaudy1 at bloomberg.net>
---------------------------------------------------------------------
[Alumnus]
<caudy at cnds.jhu.edu>
Center for Networking and Distributed Systems
Department of Computer Science
Johns Hopkins University
---------------------------------------------------------------------
More information about the Spread-users
mailing list