[Spread-users] icmptype ?

[David Carroll]

Christina, Yair and Ryan,

Thanks for your help - spread is now sending the data !

I still can't spmonitor or spuser but data can be sent it would seem and I
haven't looked further at the problem yet. So lets not panic yet.

Once again - thanks for your replies, MUCH appreciated.

Thanks

David

-----Original Message-----
From: spread-users-admin at lists.spread.org
[mailto:spread-users-admin at lists.spread.org]On Behalf Of Cristina
Nita-Rotaru
Sent: 13 November 2003 17:02
To: David Carroll
Cc: spread-users at lists.spread.org
Subject: Re: [Spread-users] icmptype ?



Spread uses two ports, I think the next one from
the one you specified in the configuration file
(4804 in your case).

-- Cristina

On Thu, 13 Nov 2003, David Carroll wrote:

> Hi Guys,
>
> Me again, and no I haven't got spread running yet. Still getting;
>
> >[Thu 13 Nov 2003 16:36:29] DL_send: sent a message of -1 bytes to
> (10.2.3.255,4803) on channel 5
> >[Thu 13 Nov 2003 16:36:30] DL_send: delaying after failure in send to
> 10.2.3.255, ret is -1
> >[Thu 13 Nov 2003 16:36:30] DL_send: delaying after failure in send to
> 10.2.3.255, ret is -1
> >[Thu 13 Nov 2003 16:36:30] DL_send: delaying after failure in send to
> 10.2.3.255, ret is -1
> >[Thu 13 Nov 2003 16:36:30] DL_send: delaying after failure in send to
> 10.2.3.255, ret is -1
> >[Thu 13 Nov 2003 16:36:30] DL_send: delaying after failure in send to
> 10.2.3.255, ret is -1
> >[Thu 13 Nov 2003 16:36:30] DL_send: delaying after failure in send to
> 10.2.3.255, ret is -1
> >[Thu 13 Nov 2003 16:36:30] DL_send: delaying after failure in send to
> 10.2.3.255, ret is -1
> >[Thu 13 Nov 2003 16:36:30] DL_send: delaying after failure in send to
> 10.2.3.255, ret is -1
> >[Thu 13 Nov 2003 16:36:30] DL_send: delaying after failure in send to
> 10.2.3.255, ret is -1
> >[Thu 13 Nov 2003 16:36:30] DL_send: delaying after failure in send to
> 10.2.3.255, ret is -1
> >[Thu 13 Nov 2003 16:36:31] DL_send: element[0]: 32 bytes
> >[Thu 13 Nov 2003 16:36:31] DL_send: element[1]: 8 bytes
> >[Thu 13 Nov 2003 16:36:31] DL_send: element[2]: 12 bytes
> >[Thu 13 Nov 2003 16:36:31] DL_send: error: Permission denied
>
> I think this is to do with the firewall - still. I have opened 4803 for
tcp
> AND udp (I believe spread uses udp, can someone confirm ?). But icmptype
is
> blocked (except echo 8+3) through my firewalls, so here is the question,
> what icmptype do I need open to send and receive spread traffic (if indeed
I
> do ?)? .
>
> Kindest Regards,
>
> David
>
>
>
> _______________________________________________
> Spread-users mailing list
> Spread-users at lists.spread.org
> http://lists.spread.org/mailman/listinfo/spread-users
>

_______________________________________________
Spread-users mailing list
Spread-users at lists.spread.org
http://lists.spread.org/mailman/listinfo/spread-users