[Spread-users] Double ethernet machine

Yair Amir yairamir at cnds.jhu.edu
Tue Nov 11 17:22:21 EST 2003

Hi Paolo,

I think your configuration file is good.
Just start Spread with -n muretto.dmsware.com and things should work.

:) Yair

On Tuesday, November 11, 2003 12:05 PM
Paolo Invernizzi paoloinvernizzi at dmsware.com wrote:

Paolo> Hello all,
Paolo> I've read the spread documentation and I'm trying to setup spread on my 
Paolo> network.

Paolo> I want to have the server on a machine with 2 ethernet cards:

Paolo> internet_card:
Paolo> intranet_card:

Paolo> Basically I want the spread daemon to work/broadcast/etc ONLY in the 
Paolo> intranet. But when I setup the machine with

Paolo> Spread_Segment {
Paolo>         muretto.dmsware.com
Paolo>         dms28.dmsware.com
Paolo> }

Paolo> the daemon complies with:

Paolo> ip_init: IP access control file not found.
Paolo> If you are using IP based access controls, please make sure the file exists.
Paolo> Conf_init: using file: /usr/local/etc/spread.conf
Paolo> Successfully configured Segment 0 [] with 1 procs:
Paolo>                    localhost:
Paolo> Successfully configured Segment 1 [] with 2 procs:
Paolo>          muretto.dmsware.com:
Paolo>            dms28.dmsware.com:
Paolo> Finished configuration file.
Paolo> Conf_init: My proc id ( is not in configuration
Paolo> Exit caused by Alarm(EXIT)

Paolo> I can avoid to have network traffic on the and start the 
Paolo> daemon?
Paolo> Tanks in advance

Paolo> ---
Paolo> Paolo Invernizzi

Paolo> _______________________________________________
Paolo> Spread-users mailing list
Paolo> Spread-users at lists.spread.org
Paolo> http://lists.spread.org/mailman/listinfo/spread-users

More information about the Spread-users mailing list