[Spread-users] Double ethernet machine

Paolo Invernizzi paoloinvernizzi at dmsware.com
Tue Nov 11 12:05:22 EST 2003


Hello all,
I've read the spread documentation and I'm trying to setup spread on my 
network.

I want to have the server on a machine with 2 ethernet cards:

internet_card: 192.168.2.99 255.255.255.0
intranet_card: 192.168.0.2 255.255.255.0

Basically I want the spread daemon to work/broadcast/etc ONLY in the 
intranet. But when I setup the machine with

Spread_Segment 192.168.0.255 {
        muretto.dmsware.com     192.168.0.2
        dms28.dmsware.com       192.168.0.114
}

the daemon complies with:

ip_init: IP access control file not found.
If you are using IP based access controls, please make sure the file exists.
Conf_init: using file: /usr/local/etc/spread.conf
Successfully configured Segment 0 [127.0.0.255:4803] with 1 procs:
                   localhost: 127.0.0.1
Successfully configured Segment 1 [192.168.0.255:4803] with 2 procs:
         muretto.dmsware.com: 192.168.0.2
           dms28.dmsware.com: 192.168.0.114
Finished configuration file.
Conf_init: My proc id (192.168.2.99) is not in configuration
Exit caused by Alarm(EXIT)

I can avoid to have network traffic on the 192.168.2.99 and start the 
daemon?
Tanks in advance

---
Paolo Invernizzi







More information about the Spread-users mailing list