[Spread-users] problems getting started

[Mike Dopheide]

Thanks to anyone who had been trying to figure this out, it turned out to 
be a problem with some iptables filtering rules.

-Mike


> I'm having problems getting spread to work and I assume it's probably 
> something very minor that I'm just not seeing.
> 
> I'm testing two spead daemons on the same network with a configuration 
> similar to the following:
> 
> Spread_Segment  192.168.1.255:4803 {
> 
>                 machine1   192.168.1.2
>                 machine2   192.168.1.3
> }
> 
> Both of the spread daemons appear to start up just fine.  Running spuser 
> on both machines I can connect, however, doing a "j test" doesn't result 
> in the expected message and the same is true for "s test" sending a test 
> message.  Essentially, it appears to be running just fine, but I don't see 
> any messages.
> 
> Note also, simple_user results in this error:
> SP_error: (-2) Could not connect. Is Spread running?
> 
> But spread is obviously running because spuser can connect.
> 
> Any ideas?
> 
> Thanks,
> Mike
> 
> 
> 
> _______________________________________________
> Spread-users mailing list
> Spread-users at lists.spread.org
> http://lists.spread.org/mailman/listinfo/spread-users
> 

--